farms

The Farm Profiles assign the farms to the profile to define the farms that will be projected. A farm profile must be created for each stage that is used – Brood, Grow and Lay. The farms can be added individually or filtered and added in groups of farms. New or virtual farms must be added to the BIM before being added to the Farm profile. Multiple  profiles can be created for the different scenarios.

Create a Farm Profile

1. In BMTS>BPA>Profiles, select Farms.
2. In the Farm Profiles main index, click on thebutton to create a new farm profile.

3. In the Profile No field, enter a unique number to identify the profile being created.

4. Enter a Profile Name to describe the profile.

5.  Suite ID is derived from the suite that is being utilized and identifies the suite.

6. Farm Type is derived from the suite being utilized and identifies the farm type.
   
   

7. Set the focus in the Farm Profiles section and click thebutton to create a new profile.

8. In the Breeder Farm Profiles Farm Selection Prompt, click on the Selected box for all that apply to the profile being created. Click 'OK' and the information will be added to the Farm Profiles section.

9. Farm No identifies the farm to be used in the profile.
10. Farm Name is populated and derived from the Farm setup in BIM.
11. Grow Out No is populated and derived from the Farm setup in BIM.

12. Farm Stage is populated and derived from the Farm setup in BIM.

13. Cost Center No is populated and derived from the Farm setup in BIM.